6
3.
Insert the driver CD, select
Install the software
automatically (Recommended)
, then click
Next
.
4.
Click
Continue Anyway
, then click
Finish
. Click
Next
again to continue.
Note
: Our driver has been thoroughly tested in
Windows for stability.
5.
Restart Windows to complete the driver installation.
To Verify Windows 2000/XP/2003 Installation
1.
Right click
My Computer
and click
Manage
.
2.
Select
Device Manager
.
3.
Double click
SCSI and RAID Controllers
, then
double click
Initio inic1620 S-ATA Adapter
.
4.
A message
This device is working properly
is displayed,
the driver has been correctly installed.
Hot-Plugging Hard Disk Drives
To remove a drive from a powered up system, do the
following:
1.
Right click
My Computer
and click
Manage
.
2.
Select
Device Manager
.
3.
Click
Disk Drives
, right click the target disk and
select
Disable/Enable
.
4.
You can now remove the target disk.
BIOS Configuration
The
SATA II-150 PCI
BIOS
will appear everytime your
system starts up. If the BIOS doesn't show, please try
your controller in another PCI slot. During this
(Post)
process, the BIOS
will show up and indicate the devices
attached to it.
