5
5.
Click
Yes
, then click
Finish.
Note
: Our driver has been thoroughly tested in
Windows for stability.
6.
Restart Windows to complete the driver installation.
Windows XP/Server 2003
New Windows XP/Server 2003 Installation
A new installation of Windows XP/Server 2003 requires
a floppy disk for the driver installation. To make this
floppy disk, copy the
contents
of the
Floppy
folder,
found on the driver CD, onto a blank floppy disk then
follow the directions below.
1.
Install the board and follow the Microsoft
procedures to install Windows accordingly.
2.
Restart your system when prompted by Windows'
installation.
3.
At the
Windows Setup
screen, press
F6
to install the
driver.
4.
Insert the driver
diskette. Press
S
then press
Enter
.
5.
Select
INITIO INIC1620 S-ATA Adapter For
Windows XP/2003
and press
Enter
.
6.
Press
Enter
to continue and follow on-screen
instructions to complete the installation.
Existing Windows XP/Server 2003 Installation
1.
Install the board and boot up Windows
2.
At the
Found New Hardware Wizard
:
XP (w/SP1 or earlier)/Server 2003
: continue to step #3.
XP (w/SP2 or later)/Server 2003 (w/ SP1 or later)
: select
No, not at this time
, then click
Next
.
