4
Ulead VideoStudio Software Installation
The
1394 DV Kit
includes Ulead
®
VideoStudio
TM
digital video editing
software for producing home videos, complete with attractive titles,
transitions and sounds. Before installing VideoStudio, make sure
your adapter and DV camcorder are properly installed and
configured. See next section,
Connecting DV Camcorder
,
for more
details on how to properly install your DV camcorder.
1. Insert the Ulead VideoStudio DV software CD. Auto-run
should start automatically. If not, click
Start
,
Run
, type in
X:\Autorun.exe
, then click
OK
. (Replace
X:
with the drive
letter of your CD-ROM)
2. Choose
Install Ulead VideoStudio
and follow on-screen
instructions to complete installation.
Note:
For instructions on how to use
Ulead VideoStudio
,
please refer to
VStudio.pdf
file located in the
Manual
directory on the Ulead VideoStudio DV software CD.
Connecting DV Camcorder
Before setting up the digital video camcorder, make sure to verify
the driver for the adapter has been successfully installed in your
system and follow the setup procedures listed below.
1. Boot up your system.
2. Connect the 4-pin connector of the provided FireWire (1394)
6-pin/4-pin DV cable into your digital camcorder, and connect
the 6-pin connector into an available port on the 1394 adapter.
Power on the camcorder. The camcorder should now appear
in
Device Manager
.
To verify successful DV Camcorder setup:
1. Check
Device Manager
to verify successful driver installation.
Windows 98SE/ME:
From the main desktop, right click
My
Computer
, then click
Properties
. Click
Device Manager
tab.
Windows 2000/XP:
Right click
My Computer
, click
Manage
,
then click
Device Manager
.
2. Double click
Imaging Device(s)
.
-
A
Microsoft DV Camera and VCR
or
DV Camcorder
should
be displayed.
