5
Windows Installation
Important:
Do not connect the
USB 2.0 Switch
to your
system until after the driver has been installed. In order
for the driver to install properly the Power LED to that
system must be switched to another system. For example,
if you connect port A to system A, make sure the Power
LED on port A is not lit.
Windows 98SE
1.
Insert the driver CD after Windows boots.
2.
AutoRun should start the installation. If
AutoRun doesn't start, click
Start
,
Run
, Type
D:\setup.exe
, then click
OK
. (Change
D:
to
match your CD-ROM drive).
3.
Select the correct language and click
OK
.
4.
Click
Next
,
Next
, then
Finish
.
5.
Restart your system. After Windows boots,
connect the
USB 2.0 Switch
to your systems with
the USB cables.
6.
When Windows prompts for the driver again,
click
Next
.
7.
Select
Search for the best driver...
, and click
Next
.
8.
Clear all check boxes, click
Next
,
Next
, then
Finish
. Click
Yes
to restart.
