6
Important
: In most cases the
USB Data
Connector
will supply enough power to
the enclosure. If not, use the optional
USB
Power Connector
to supply more power.
Before proceeding, first unplug the
USB
Data Connector
, then plug the
USB Power
Connector
into an available USB port,
then re-plug the
USB Data Connector
.
7.
USB 3.0 to IDE/SATA 6Gb/s 2.5" Enclosure
will turn on automatically. Make sure that
the two
LED
is lit.
Go to
Driver Installation
to complete the
installation.
Driver Installation
Windows will automatically detect and install
drivers for the
USB 3.0 to IDE/SATA 6Gb/s 2.5"
Enclosure
when connected. No additional driver
installation is needed.
Summary of Contents for JU-SA0H11-S1
Page 13: ...13 Blank Page...
Page 14: ...14 Blank Page...
