3
2. Restart your system.
3. Connect the small 4-pin connector of the 1394 DV cable (included
with the 1394 DV-Cam Kit model only) to the camcorder, then
power-on the camcorder.
4. Connect the other end of the cable to the 1394 host adapter.
5. The Building Driver Database dialog box should appear and the
device driver will be automatically loaded.
If the Building Driver Database dialog box does not appear:
a. Double-click on My Computer, Control Panel, System, Device
Manager,
then 1394 Bus Controller device options.
b. Highlight “OHCI Compliant IEEE 1394 Host Controller”
and click on Properties, then Settings.
c. Check the “Support Non-Compliant Devices” option. Click
“OK”
.
d. Click “OK” again to exit Device Manager and click “Yes” to
restart the system. When Windows 98 reboots, the Building
Driver Database dialog box should indicate that the new
device has been detected.
The installation is now complete.
To verify successful device setup:
1. From the main desktop, double-click on My Computer, Control
Panel
, System, then Device Manager.
2. Double-click on the Sound, video and game controllers
option. “1394 DV Camcorder” should be displayed when the
device is successfully set up.
For Windows 98SE (Second Edition)
1. When Windows 98SE boots up, connect the small 4-pin connector
of the 1394 DV cable (included with 1394 DV-Cam Kit model only)
to the camcorder, then power-on the camcorder.
2. Connect the other end of the cable to the 1394 host adapter. The
camcorder should be recognized by the system. Setup is complete.
