2
5. For Windows 98: Click “Next”.
For Windows 98SE: Choose “The updated driver
(Recommended)
”, and click “Next”, then “Next” again.
Note:
if Windows prompts you for the Windows CD-ROM
again, type in D:\win 98 and click “OK”. (Assuming "D" is
the CD-ROM driver letter)
6. Click “Finish” to complete the installation.
To verify successful driver installation:
1. From the main desktop, double-click on My Computer, Control
Panel
, System, then Device Manager.
2. Double-click on 1394 Bus Controller device option.
For Windows 98: “PCI OHCI Compliant IEEE 1394 Host
Controller”
should be displayed.
For Windows 98SE: "Texas Instruments OHCI Compliant IEEE
1394 Host Controller”
should be displayed.
The driver is installed. The ports are ready to connect devices.
Connecting 1394 Devices
Connecting a DV Camcorder
Before setting up a digital video camcorder, verify the version of
Windows 98 (Windows 98 or Windows 98 Second Edition) in your
system. Refer to the appropriate section for your version.
For Windows 98:
1. Before connecting your DV camcorder to the 1394 host adapter,
perform the following steps:
a. For 1394 3-Port PCI: insert the driver diskette. Go to Start,
Run
, then type: "A:\DVconnect150.exe". Click "OK".
b. For 1394 DV-Cam Kit: insert the CD-ROM. Go to Start,
Run
, then type: "D:\DV\DVconnect150.exe". Click "OK".
(Assuming “D” is the CD-ROM driver letter.)
