Instruction Manual LabScat 2
Operation
28
12112E/2
WORKSTEP
ADDITIONAL INFO / IMAGES
3.
Check whether the desired linearization is ac-
tive.
You can switch between the standard
and customer-specific linearization with the
Lin
button.
4.
Press the
Measure
button.
5.
Confirm entry with
OK
. Measurement starts.
During measurement, a progress
display is shown. Operation is blo-
cked while measurement is run-
ning.
6.
If the
Name
was activated in the
Log-
ger/Data
menu, enter the sample name in
the input mask.
The entry can be made via the touchscreen or
via a connected USB keyboard or barcode rea-
der.
7.
After a successful measurement, the measured
values are shown on the display.
On the right, the minimum value, the maxi-
mum value and the standard deviation are
displayed.
Large measuring value fluctuations point
to an inhomogeneous sample.
Incorrect measurement
If the measurement did not run correctly, an
error message is output in the status line.
