4.3 LAN Cable Entrance
The housing has two sealed LAN cable entrance points. Depending of the configuration, one or two
entrances can be used. Two entrances are used in the PoE chain configuration, one for LAN IN cable and the
other for LAN OUT cable.
4.3.1 Unscrew the gland box nut [2] and push out the seal plug [3].
4.3.2 Pass the cable [6, 1] through the nut [2] and through the gland box [4] into the housing.
4.3.3 Put the seal plug [3] on the cable [1] and insert it into the gland box [4].
4.3.4 Tighten up the gland box nut [2].
4.4 Single-port LAN Connection
4.4.1 Connect the LAN IN cable to the PoE input port of the housing.
4.4.2 Connect the housing's PoE output port to the camera's PoE port by the short Ethernet patch cord.
4.5 PoE Chain LAN Connection
A camera with two Ethernet ports and PoE chain capability should be used to make a PoE chain. The
housing has no PoE chain capability itself. In such a case the housing should be powered through its 48V DC
input. The 48V DC voltage is derived from the LAN IN cable by means of supplied PoE Extraction Adaper.
Note: Some features are not functional in the PoE chain configuration: camera ON/OFF control, camera
power consumption monitoring, and the Preheat feature.
4.5.1 Connect the LAN IN cable to one port of the PoE Extraction Adaper.
4.5.2 Connect the other port of the PoE Extraction Adaper to the PoE IN port of the camera by the short
Ethernet patch cord.
4.5.3 Connect the 48V OUT cable of the PoE Extraction Adaper to the 48V DC input of the housing.
4.5.4 Connect the LAN OUT cable to the POE OUT port of the camera.
4.6 Mounting
4