Before connecting to power supply, TURN OFF ELECTRICAL
POWER AT CIRCUIT BREAKER OR FUSE
Disconnect AC power before servicing.
Refer to wiring diagram for proper connections.
All servicing should be performed by qualified personnel.
Consult your local building code for approved wiring and installation.
Do not use outdoors.
Suitable for indoor damp locations (when specified).
Do not let power cords touch hot surfaces.
Do not mount near gas or electric heaters.
Mount and secure exit sign at a location and height to avoid
ready access and tampering by unauthorized persons.
(Exception: Floor proximity installations)
The use of accessory equipment is not recommended by
the manufacturer and may cause an unsafe condition.
Do not use this equipment for other than intended use.
IMPORTANT SAFEGUARDS
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Signtex Inc
LIGHTING
Series CAEBB
Installation Instructions & Users Manual
Crystal Accessible Exit Edge- Lit LED Sign System
Battery Backup Models
06.16.00
Designed to meet requirements of State of Connecticut, State Fire Safety Code Para 1011.1.1 and 1011.1.2
