Fishing on Ice
To achieve the best performance for ice fishing, it is
highly recommended that you cut a hole through the
ice and place the sonar sensor directly in the water.
If you would like to check the area for depth or fish
before cutting the hole.
Clear away snow to expose the ice surface, making
sure the surface is smooth.
Place a small amount of liquid water on the ice and
set the sonar sensor on the water allowing the unit
to freeze to the ice.
If there are any air pockets between the sonar senor
and ice, or air on the water below the ice, the unit will
not work properly and will require you to try another
spot, or cut a hole in the ice to use.
