23
Floating Transducer
Fixing the Transducer
1
Pull out the rubber stopper, adjust float so
that it is 18 to 25 cm from the sensor, or at your
desired depth.
Replace the rubber stopper
by pressing it firmly into the
float.
The sensor float must be
adjusted so that it is a
minimum of 18 cm away
from the sensor.
2
Toss the sonar sensor and float assembly into
water at your desired fishing location.
To toss, place the sonar sensor and float in your
hand, and pitch underhand. Do not throw the
sensor by the cable as this will cause
unrepairable damage.
