Signode DF-2D, Operation, Parts And Safety Manual

Page: 6 / 20

6
LOADING AND THREADING, Continued
4. Confirm payoff direction by making sure
the that arrows printed on the
corrugated belly-band point towards the
strap guide roller and wire keeper.
5. Unhook the loading latch from the end of
the upper arm assembly.
6. Raise the lower arm up and secure it in
place by hooking it to the loading latch
using the head of the cap screw from the
lower arm assembly.
7. Remove the plastic film from the coil,
remove the corrugated belly-band and
remove the tape that secures the lead
end. Thread the lead end of the strap
through the brake arm roller and keeper.
Refer to threading diagram shown on
page 9 of this manual. Continue to
thread the strap into the strap guide
tube.
8. Continue to thread the strap from the
strap guide over the first upper idler
wheel. Make sure to thread the strap
through the roller assembly as shown.