background image

4

Inform yourself!

Read the operating
instructions carefully

Protect yourself[

When operating the tool,
wear eye, face and hand
protection (cut-proof
gloves).

Power resource!

Before starting preventive
or corrective
maintenance, remove
battery from the tool.

Warning:
Strap will snap forward!

When cutting the strap,
hold the upper portion
and stand safely away
from the strap.

Caution:

The lower strap will snap
forward.

Warning:
Strap could break!

Do not stand in line with
the strap while it is
tensioned. The strap

could break!

Do not use water!

Do not use water or

steam to clean the

tool.

Caution:
Danger of squeezing!

Do not put your fingers

into the tension wheel
area.

Caution:
Only strap packed
goods!

Do not put hands or other
parts of the body
between the strap and
the package during the
strapping process.

Original spare parts
must be used
exclusively!

Not using original spare
parts will dissolve the
warranty and the liability.

Use for the intended purpose

The tool is intended for strapping packages,
pallet loads etc.

This tool was designed and manufactured for
safe handling during the strapping operation.

The tool processes plastic straps (polypropylene
and polyester).

Possible misuse

The use of steel straps is not possible.

Always inspect the electrical plug and cable
before use. If damaged, they must be replaced
by a qualified professional.

Do not charge other types of batteries and
use original accessories only.

Keep the battery charger slot free of foreign
objects and protect against dirt.

Protect battery charger against humidity and
operate in dry areas only.

Do not open the battery. Protect the battery
against impact, heat and fire. Danger of
explosion!

When the battery is outside the battery
charger, cover battery terminals to avoid
short circuits from metal objects. Danger of
fire and explosion!

Keep battery dry and away from frost. Do not
store in temperatures over 500C.

Damaged batteries should not be used
anymore.

 3

SAFETY INSTRUCTIONS

3.1 SAFETY INSTRUCTIONS FOR

BATTERY CHARGER & BATTERY

Summary of Contents for BHC

















Reviews: