page
443561208870 REV F
x
2021
5
YK - Yoke Mount
-
(Cont’d)
OK to mount
floodlight “down”
on yoke mount.
Align aiming mark
with correct
degree marks on
bracket
Opening Glass Door Frame
Note: Procedure to open glass door frame
is the same on slip fitter and yoke mount
fixtures. It is not necessary to remove
glass to install luminaire
STEP 1:
Unfasten the captive shoulder screw
around the glass perimeter excluding the
bottom left safety screw.
STEP 2:
Collect all screws and remove glass
gently. Be sure that gasket is still seated
on rib. Safety cable should remain
attached while servicing luminaire
STEP 3:
After servicing luminaire, carefully rotate
glass door frame up into closed position
and retighten screws loosened in Step 1.
Safety cable fastener
06/28/20211
CLEARSCAPE MAIN INSTALLATION
CSFS / CSFM
