MODEL: ET0195 PRODUCT CODE: 55913 12/2016 19
AFTER SALES SUPPORT
1300 777 137
Basic Operations (cont.)
1.
Press and hold down the call
(C)
button until the channel number located on the display starts to scan
automatically through the channels.
2.
The channel number on the display screen changes rapidly until an active signal is detected. When
an active signal is detected, the channel scan pauses on the active channel which is transmitting. The
Radio will stay on this active channel until the transmission has stopped. But if the active channel
does not transmit, the channel scan will continue.
3.
To manually resume channel scanning, press the up
( )
button to resume scanning or the down
( )
button to resume scanning back previous channels.
4.
If you want to stay on the selected channel, press the PTT button to stop the scan.
To Scan Channels Automatically
Channel scan performs searches for active signals in an endless loop of channels. This can help you to
locate channels that your other Radio or other PMRs in your area and enable you to communicate with
them.
Note:
To communicate with other models and brand of radios, the actual radio frequency and
sub-channel (CTCSS/DCS) frequency must be matched.
Note:
In this mode, only the main channels will be scanned, not the CTCSS/DCS (sub-channels). After
you have selected your main channel and have stopped the scan, follow the instructions on page 24 to
select the CTCSS/DCS code for sub-channel.
Note:
Channel 40 is generally used for customary road vehicle channel and may be active in your area.
As a result, the Radio auto-scan may constantly stop in those active channels. This is not a fault of the
product. To resume scanning, please follow the steps above.
