MODEL: ET0195 PRODUCT CODE: 55913 12/2016 13
AFTER SALES SUPPORT
1300 777 137
Getting Started (cont.)
3.
Observing the orientation on the battery pack, insert the battery pack by first inserting the top part of
the battery pack into the battery compartment, then by pushing down the bottom part of the battery
pack firmly, until it clicks into place. Ensure that the battery information label is facing you and that the
arrow on the label is pointing up.
4.
Replace the battery compartment cover by aligning the tabs on the top of the battery cover, with the
ridges inside the top of the battery compartment. Then push down the battery cover and click the
battery safety tab back down into place.
5.
Push the belt clip back into place.
Note:
The Radios may also be powered with 3 AAA regular Alkaline batteries. The TX power is always
lower for alkaline batteries. Please make sure you observe the correct polarity markings (found inside
the battery compartment), before inserting the batteries. Do not leave batteries installed over a long
period of time as leakage may occur and this can destroy the Radio. Do not use the charging base to
charge the Radios unless the batteries that have been inserted are rechargeable batteries. This will cause
the batteries to leak and it will damage the product.
Warning:
To avoid damage to the unit do not mix old and new batteries.
Charging the Battery
1.
Make sure that the Radios are turned off.
2.
Plug the DC connector into the DC power input found on the rear of the charging base, then plug the
AC power adaptor into a power outlet and turn on.
3.
Place the units into the charging base ensuring that the Radios are in the correct way. The charging
points on the base of the charging base should come into contact with the charging points on the
back of the Radio.
