SIGNIFY EA0588, Instruction Manual

Page: 14 / 33

AFTER SALES SUPPORT
1300 777 137
14
service@unclebills.com.au
MODEL: EA0588 PRODUCT CODE: 51830 11/2016
Instructions (cont)
Auto-Search for AM/FM Radio Stations
The Jukebox features an auto-search AM/FM tuner to assist in finding radio stations with a
strong enough signal to play. There are two ways that you can auto-search using the tuner.
1. Press the Pause /Play button for the Jukebox to scan the entire frequency on either
AM or FM band. The auto-search will also save the stations into the 20 station memory
of the Jukebox which are labelled P01 – P20 (Program 1 – Program 20). The first station
that the tuner finds will be saved under P01, the second station that the auto-search
finds will be saved under P02, and so on. This will continue until the tuner has scanned
the entire frequency or until it has saved stations into all 20 program presets.
2. To auto-search for the nearest station only, simply press and hold the Next /Tuner+
or Prev /Tuner- for approximately 3 seconds and the tuner will automatically search
up or down the AM/FM band (depending on the buttons pressed) to find the nearest
station. When the tuner finds a station that is strong enough it will stop searching and
begin to play this station. The station will also be displayed on the LCD Display. This
auto-search function will not save the stations automatically and it will not continue to
search past the first radio station found. You will need to repeat this process until your
desired station is found.
Manual Searching for AM/FM Radio Stations
To do a manual search, simply press the Next /Tuner+ or Prev /Tuner- buttons. The
tuner will search in 0.01MHz increments in “FM” mode and 9KHz increments in “AM” mode.
Keep pressing the Next /Tuner+ and Prev /Tuner- buttons until you have reach your
desired station. Do not hold the buttons down as the tuner will automatically search for the
next strong frequency. Once the tuner has reached the desired radio frequency, the Jukebox
will begin to play and station frequency will be displayed on the LCD display.
Program AM/FM Stations
You can automatically program preset stations by using the auto-search function (refer
to Auto-Search for AM/FM Radio Station) or manually tune them and save your favourite
stations (refer to Manual Searching for AM/FM Radio Stations).
To manually add station presets, use the Next /Tuner+ and Prev /Tuner- buttons to
search for the radio frequency. Once you have found your desired radio frequency, press the
Prog/Play Mode button to save it as a preset. The LCD display will show P01 as per below.