SigTEL Compact
Operator Instructions
SigTEL
Approved Document No. DAU0000092 Rev 4
Page 13 of 16
Emergency Voice
Communication System
16 Additional Operator Functions (Networked Systems)
In addition to the functions listed in section 15, Operators on a networked system can access the following functions
at wall and desk control units.
Note:
The display on the desk control unit differ to that of the wall control unit. The corresponding buttons on the
desk control unit are:
and
= Scroll Up/Down,
F
= FUNCTION,
= CALL/ACCEPT,
#
= END,
D
= DIRECTORY
16.1 To take control from the master unit at a repeater unit (when outstations calling in)
1. When there is an incoming call on the system, the current master unit displays
the call. All current repeater wall and desk control units display the message
shown right.
2. At any repeater unit, pick up its handset and enter the requested security PIN
code using the keypad.
3. The repeater unit takes control of the system, becomes the current master unit
and answers the call.
The displays at each unit on the network confirm their network status.
16.2 To take control from the master unit at a repeater unit (when no outstations calling in)
1. When there are no incoming calls on the system, at a current repeater unit (with
its handset on-hook) press
FUNCTION
(or
F
) button. The
User Opts
menu is
displayed.
2. Select
Take Control
option and press
CALL/ACCEPT
button.
3. Enter the security PIN code using the keypad. The current master unit changes
location and the displays at each unit on the network confirm their network status.
Units Calling
Master
Lift
Handset
to take
control
U s e r O p t s
>
Take Control
About...
R c n t C a l l s
>
Extension 2
Extension 3
Extension 4
E n t e r
P I N
E n t e r
P I N
