20
Enter into [Main menu
Device
PTZ Setup] to select the channel
you want to control and set PTZ protocol (Pelco-D or Pelco-P), Baud
Rate (1200, 2400, 4800, 9600), Stop bit (1, 2), Parity Check (None, Odd,
Even Mark Space), Address Code and Cruise status respectively.
Please note the above mentioned channel settings must match the
settings of the PTZ camera.
SMTP Port:
indicates sender port of SMTP server. Generally the SMTP port value is 25, SMTP
port of G-mail server is 465.
SMTP:
indicates server address you use.
Sender email:
indicates sender’s email address. The email address should be consistent with the server
you use. That is to say, when you use email address – aaa@gmail.com, the according server should be
smtp.gmail.com.
SEND PW:
enter the login password of send email.
RECV EMAIL:
indicates receiver’s email address. The email address is used to receive image
transmitted from motion detection or I/O triggered alarm of DVR. Please clear the images you have received
as soon as possible to avoid overloading your email account.
For detailed SMTP protocols settings refer to the below picture 5-35A.If your setting is still not ri
ght, please contact the web site where you have applied for your email box to get SMTP server and
SSL of mail box.
Note: Sender email is required to enable IMAP/POP3/SMTP function (details please refer Pi
cture 5-39 & Picture 5-40, which is IMAP/POP3/SMTP Enable setting for Gmail and QQ mail)
Login your GMAIL ID and turn to
Settings
page. Find out
Forwarding and POP/IMAP
option and then
enable IMAP function.
Note: Some mail server not support IMAP/POP3/SMTP enabling function freely. Please consult if the site
server you located will support SMTP and SSL service before using the enabling function.
If you fail to receive Email alarm message, please check below setting and DVR connection status:
DVR network connection is normal or not;
Receiver and sender email support SMTP protocol freely or not;
You have correctly set email alarm parameter or not;
DVR is on the I/O alarm or Motion detection status or not (system will send/receive the alarm email only
when DVR is on the alarm status).
5.2.6.3 PTZ Setup
Picture 5-39
Picture 5-40
Picture 5-41