Integrity Voice Alarm Routing Matrix
FMIC Manual
Page 3 of 8
DocNo.DCP0002986 ADS 11/12/05 rev0
Installation
Open the door and remove the eight screws holding the back plate. If only two screws are fitted, the
other screws will be provided in a plastic bag.
Unplug the Cat 5 lead from the terminal block, remove the back plate and keep it safe.
The FMIC should be located in an area that will be as quiet as possible in an emergency.
Fix the box to the wall, normally between 1.2 and 1.4 metres from the final floor position using suitable
fasteners.
In the UK, standard or enhanced fire-rated cables (BS 5839-1 2002) should be used.
FMX
1ZPR
Eight back
plate screws
VU meter
unplug
Terminal block
DIP
it h
Mounting holes
20 mm knockouts
Mic holder
