background image

7

www.signaturebrand.co

USING YOUR APPLIANCE

•  Place the cordless base on a firm and 

level surface. 

•  Pour the desired amount of clean water 

into the kettle. Do not touch any part of 

the kettle except the handle. When the 

appliance is in use, ensure that the cover 

is properly closed. The amount of water 

inside can be measured by the level mark 

on the outside of  the kettle. Always pay 

attention to the minimum & maximum 

levels, and ensure that the cover is 

properly and firmly closed.

•  Position the kettle in such a way on the 

sub base that the underside of the kettle 

fits precisely into the contact on the base. 

•  Insert the plug into a wall socket.
•  Move the on/off switch to the ‘1’ position 

to start the heating process. After this the 

indicator lamp will light up.

•  When the water reaches the boiling point, 

the on/off switch will return automatically 

to the “0” position and the indicator lamp 

will go out.

•  The kettle can also be switched off 

manually by putting the on/off switch to 

the “0” position. 

•  The hot water in the kettle can now be 

poured safely through the spout into 

another container.

•  This kettle is equipped with a safety 

cut-out to protect the appliance from 

damage in case of inappropriate use, 

should the appliance be accidentally 

operated without water or if all the water 

has evaporated the safety cut out will 

automatically switch off the heating 

element. 

•  In such a case remove the plug from the 

wall socket immediately and refill the kettle 

only after an adequate cooling down 

period, around 15-20 seconds. 

DE-SCALING

 

•  Should the appliance switch off before 

reaching boiling point this is 

a sign that de-scaling is necessary. 

•  Any regular de-scaling agent may be 

used, provided the relevant instructions 

are observed. To avoid spillage, DO NOT 

fill the kettle to the upper mark if the de-

scaling agent causes the water to foam. 

•  To clean the kettle thoroughly of any 

de-calcification residue; let it go through 

several boiling cycles using clean water 

with each cycle. Rinse the kettle with 

clean water afterwards.

CLEANING AND CARE

 

•  Before cleaning the appliance, ensure it is 

disconnected from the power supply and 

has cooled down completely.

•  Do not use abrasives or harsh cleaning 

solutions.

•  Do not immerse the base or the kettle in 

any liquid. To clean the exterior, a slightly 

damp, lint–free cloth may be used.

•  It is advisable to remove lime deposits 

from the kettle at regular intervals.

WARNING:

 

DO NOT IMMERSE ANY ELECTRICAL PART 

OF THE APPLIANCE IN WATER SUCH AS 

MOTOR UNITS OR PLUGS.

PLEASE SEE CLEANING SECTION FOR 

FURTHER INSTRUCTIONS.

DISPOSAL OF THE UNIT

Appliances bearing the symbol shown here 

may not be disposed of in domestic rubbish. 

You are required to dispose of old electrical 

and electronic appliances like this separately.

Please visit www.recycle-more.co.uk or 

www.recyclenow.co.uk 

for access to information about the recycling 

of electrical items. 

Please visit www.weeeireland.ie for access to 

information about the recycling of electrical 

items purchased in Ireland.

The WEEE directive, introduced in August 

2006, states that all electrical items must be 

recycled, rather than taken to landfill.

Please arrange to take this appliance to your 

local Civic Amenity site for recycling, once it 

has reached the end of its life.

Summary of Contents for S101









Reviews: