27
INSTALLATION INSTRUCTIONS
Preparing the Installation Location
Important Installation Information
•
All electric cooktops run off a single phase, three-wire or four-wire cable, 240/208 volt, 60 hertz, AC-only
electrical supply with ground.
•
Minimum distance between cooktop and overhead cabinetry is 30” (762 mm).
•
Make sure the cabinets and wall coverings around the cooktop can withstand the temperatures (up to 93˚C
[200˚F]) generated by the cooktop.
1. Standard Installation
30" min.
(762 mm)
Radius
36 5/8"
(930 mm)
33 7/8"
(860 mm)
21 9/16"
(547 mm)
19 5/16"
(490 mm)
3/8"
(10 mm)
4 1/4"
(108 mm)
4 1/4"
(108 mm)
Height of conduit: 2 1/16"
(52 mm)
2 1/4"
(56 mm)
4" x 8"
(102 mm x 203 mm)
opening to
route armored cable if panel is present
34 9/16"
(878 mm)
24"
(610 mm)
19 11/16"
(500 mm)
2 1/2" min.
(64 mm)
1 13/16" min.
(46mm)
1 1/8" min.
(28 mm)
Do not obstruct these areas!
36 inch Induction Cooktop
2. Flush Installation
30" min.
(762 mm)
Radius
36 5/8"
(930 mm)
33 7/8"
(860 mm)
21 9/16"
(547 mm)
19 5/16"
(490 mm)
3/8"
(10 mm)
41/4"
(108 mm)
4 1/4"
(108 mm)
Height of conduit: 2 1/16"
(52 mm)
2 2/8"
(56 mm)
4" x 8"
(102 mm x 203 mm)
opening to
route armored cable if panel is present
Same Both side
36 3/4"
(934 mm)
24"
(610 mm)
21 11/16"
(551 mm)
2 1/2" min.
(64 mm)
1 1/8" min.
(29 mm)
1 1/8" min.
(28 mm)
1 1/4"
(31.5 mm)
1/4"
(7 mm)
6/8"
(19.5 mm)
1/4"
(7 mm)
1 1/8"
(28 mm)
1/4"
7(mm)
Radius
5/16"
(12 mm)
Do not obstruct these areas!
36 inch Induction Cooktop
•
All dimensions are stated in inches and millimeters (mm).
•
Allow 2" (50 mm) space below the armored cable opening to clear the electric cable and allow space for
installation of the junction box on the wall at the back of the cooktop.
