3
CLEANING AND MAINTENANCE
S I M O N E
STAINLESS STEEL BATHTUB
SKU: 934591, 912095
It is recommended that you use a cleaner or polish
that is designed speci�cally for stainless steel
products. You may use a gentle soap, such as dish
washing liquid and warm water. Acidic cleaners, such
as lemon juice, should be avoided. We recommend
the use of a soft sponge or micro�ber washcloth. Do
not use any abrasive cleaning pads or materials.
Rinse with warm water and dry with a clean, soft
cloth.
Minor scratches can be removed using a scratch
remover designed speci�cally for stainless steel or
metals. Refer to the directions for the product being
used, as each scratch remover will have its own
step-by-step procedure. For deeper scratches, wet
sanding may be necessary using 600-grit (coarse) or
1000-grit (�ne) sandpaper attached to a rubber
sanding block. After sanding, use a stainless steel
polish to restore shine if desired.
5. Apply 100% neutral cure silicone sealant to the
underside of the drain �ange and thread it through
the tub and into the drain pipe. Apply thread sealant
or plumber’s tape to the threaded connection to
ensure a water-tight seal. Tighten by hand. Wipe
away any excess sealant using a damp cloth.
6. Fill the tub with water to check for any leaks from
the connections. Verify that the drain is working
properly.
