Jason International, Inc.
·
501.771.4477 Page 1 of 12 Customer Service: 800.255.5766
Copyright © 2021 Jason International, Inc.
If the carton shows sign of damage,
inspect the product before accepting
and describe the problem on the Bill of
Lading.
INSPECTION
Inspect the unit prior to installation. In the event of a
problem, DO NOT install the unit.
All components are factory assembled to the bath and the
unit is water tested and inspected prior to leaving Jason
International, Inc.
NOTE: Transportation and insurance
from Jason’s
factory are the buyer’s responsibility.
Damage sustained in transit is the responsibility of the
carrier.
If damage is discovered, the carrier must be
immediately notified in writing with a request for a
representative to inspect the unit. Failure of the carrier to
respond should be reported to the seller and carrier.
Always file a freight claim promptly.
The installer is responsible for insuring that the unit is free
from defects or shipping damage.
In the event of a
problem, DO NOT install the unit.
Jason International is not responsible for damage that
might have been avoided by inspection or testing prior to
installation.
Damage to the unit during installation will not be covered
by warranty and is the responsibility of the installer.
ALL WARRANTY CLAIMS ON ACRYLIC SURFACE
DAMAGE MUST BE MADE PRIOR TO INSTALLATION
.
Inspect plumbing and bath surface for missing or damaged
components. Alert your dealer of any discrepancies.
To protect the unit from damage keep the bath in the
carton until ready for installation.
EQUIPMENT ACCESS
In accordance with Building Codes, service access to all
hydrotherapy bath equipment, controls and electrical
connections must be provided during installation
(
Recommended minimum 28” x 17” [71 x 43 cm])
.
Insufficient access will hinder repair and maintenance.
Warranty service will not cover costs of providing
equipment access.
Jason offers an optional removable lateral skirt for all
rectangular baths. The skirts are available in matching
acrylic colors and provide convenient access to bath
equipment, as well as an excellent finished appearance.
The Specification Sheet for this bath contains additional
technical information. This sheet can be provided by your
dealer or accessed online at
Jason International, Inc.
8328 MacArthur Drive
North Little Rock, AR 72118
MADE IN THE U.S.A.
49-1018-002
Date 05/2021
Excel
™
Collection Baths
INSTALLATION, OPERATION AND MAINTENANCE
