background image

Bathtub Installation Instructions

READ THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING THE PRODUCT. FOR  PRODUCT OR

INSTALLATION QUESTIONS PLEASE CALL CUSTOMER SERVICE AT 1-800-221-3379.

YOU MUST FOLLOW ALL INSTRUCTIONS IN THIS MANUAL: FAILURE TO DO SO WILL RESULT IN YOUR

ASSUMPTION OF LIABILITY AND WILL VOID WARRANTY AND CAN RESULT IN PRODUCT DAMAGE OR

PERSONAL INJURY.

FAILURE TO USE A SUITABLE SETTING COMPOUND WILL VOID THE WARRANTY.

THIS PRODUCT IS DESIGNED TO BE INSTALLED BY A LICENSED TRADESMAN. LICENSED PLUMBERS AND

ELECTRICIANS SHOULD BE EMPLOYED TO INSURE PROPER INSTALLATION. INSTALLERS ASSUME ALL LIABILITY 

FOR THE CORRECT INSTALLATION PROCEDURES. 

Only accessories authorized by the manufacturer should be used with this product. This product is designed for.

residential use and use by healthy individuals. 

IMPORTANT SAFETY INSTRUCTIONS: WARNING! WHEN USING THIS PRODUCT, BASIC PRECAUTIONS SHOULD 

ALWAYS BE FOLLOWED. READ AND FOLLOW ALL INSTRUCTIONS PERTAINING TO RISK OF FIRE, ELECTRIC  

SHOCK, OR INJURY TO PERSONS.   

INSTALLER:  LEAVE THIS MANUAL FOR HOMEOWNER.

HOMEOWNER: READ THIS MANUAL AND KEEP FOR FUTURE REFERENCE.

1

CAP 06/17-A

Summary of Contents for MNO series







Reviews: