4
W I N I F R E D
RESIN FREESTANDING TUB
SKU: 918954, 946438, 944333
1. Set the tub in the desired location and mark the
drain hole location on the �oor. Then, move the tub
away from the desired installation location so that the
plumbing can be installed.
2. Turn bathtub upside down and rest it on a moving
blanket, cardboard, or other soft surface to prevent
scratching the rim. Use caution when turning the
bathtub upside down, as the product may be heavy
and may require assistance to rotate.
INSTALLATION:
WITHOUT UNDERFLOOR ACCESS /
SLAB FLOOR INSTALLATION
Moving blanket
TOP
BOTTOM
3. Place a level across the bottom of the tub to
represent �oor level. Raise adjustable leveling supports
to touch level. Then, raise the support an additional
1/8" to ensure the bathtub is supported by the support
feet and not by the tub walls.
4. Once support feet are adjusted, dry �t the PVC
hub adapter onto the drain threads. Use a tape
measure to determine the gap between the bottom
of the tub, starting at the drain inside �ange of the
hub adapter, and the �oor. Use the level to simulate
the �oor. The drain pipe should extend approximate
-
ly 1” above the �nished �oor; however, this will vary
depending on the height of the tub.
1/8”
Support feet
Tub wall
Tape measure
PVC hub adapter
