background image

H162

© 2008 AS America Inc.

NOTES:

0153.015 LEFT HAND OUTLET (SHOWN).

0155.017 RIGHT HAND OUTLET (REVERSE DIMENSIONS).

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH BATH FOR  

ADDITIONAL INFORMATION.

SHOWN WITH POP-UP C.D. & O.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

CONCEALED PIPING NOT INCLUDED.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the range 

of tolerances established by ANSI Standard A112.19.4. These measurements 

are subject to change or cancellation. No responsibility is assumed for use of 

superseded or voided leaflet.

To Be Specified:

  Color:

  Bath Faucet*:

  Faucet Finish:

❏ 

 Drain: 1583.470

* See faucet section for additional models available

SALEM 14™

RECESS BATH 

ENAMELED STEEL

SALEM 14™ RECESS BATH

❏ 

0155.017  Right hand outlet

 

0153.015  Left hand outlet

 

Product Features:

 

•  Acid resisting, heavy gauge, enameled

 

  steel one-piece recess bath

 

•  Integral apron

 

•  End drain outlet

 

•  Slip-resistant surface

 

•  Straight tiling bead

 

•  Fully-bonded support pad

Nominal Dimensions:
1524 x 762 x 356mm 
(60" x 30" x 14")

Bathing Well Dimensions:
1346 x 610 x 337mm 
(53" x 24" x 13-1/4")

Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4 for Enameled Steel Plumbing
  Fixtures
• ASTM F-462 for Slip-resistant Bathing Facilities

Revised 2/08

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES 

AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND 

USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.

INSTALL WITH SEAT AT HEAD END.

762mm

(30)

1524mm

(60)

19mm

(3/4)

19mm

(3/4)

365mm

(14-3/8)

197mm

(7-3/4)

13mm

(1/2)

305mm

(12)

102 (4)

102

(4)

102mm

(8)

356mm

(14)

229 x 305mm

(9 x  12") CUTOUT

FINISHED

WALL

1-1/2 N.P.T.M. THREADS

1-1/2 O.D. TAILPIECE

C/L OF VALVES

(44mm [1-3/4"]

DIA. HOLES)

SPOUT

1/2" S.P.S.

ROUGH

FLOOR

PLUMBER NOTE:

PROVIDE SUITABLE FULL LENGTH

SUPPORT AT THIS POINT.

OPTIONAL TO FINISHED TO FINISHED

FLOOR (USUALLY BETWEEN 1651 to 

1981mm ( 65" & 78')

C/L OF SHOWER CURTAIN ROD

(USUALLY 1930mm (76") 

FROM FIN. FLOOR)

1/2 S.P.S. OR 1/2"

C.W.T. SUPPLIES

FINISHED

WALL

FINISHED

WALL

C/L OF DRAIN

SHOWER 1/2" S.P.S.

NOTE: NO CONCEALED

PIPING FURNISHED

SUMP PAD

711mm

(28)

203mm

(8)

76mm

(3)

BARRIER FREE

Reviews: