background image

 Signamax

 065-7727S 24-Port 10/100BaseT/TX Managed Switch

 

Publication date: March, 2008 

Revision A1 

 

• 

Supports 802.1Q VLAN with 256 entries. 

• 

Supports user management and limits three users to login

 

• 

Supports DHCP Broadcasting Suppression to avoid network suspended or 

crashed 

 

• 

Supports to send the trap event while monitored events happened 

 Supports default configuration which can be restored to overwrite the current 

configuration which is working on via web browser and CLI   

• 

Supports on-line plug/unplug SFP modules

 

• 

Supports 5 kinds of QoS, are as follows, MAC Priority, 802.1p Priority, IP TOS 
Priority, and DiffServ DSCP Priority.

 

• 

Built-in web-based management and CLI management, providing a more   
convenient UI for the user

 

• 

Supports port mirror function with ingress/egress traffic

 

  Supports rapid spanning tree (802.1w RSTP)

 

• 

Supports 802.1x port security on a VLAN 

• 

Supports user management and only first login administrator can configure the 

device. The rest of users can only view the switch

 

• 

SNMP access can be disabled and prevent from illegal SNMP access 

 

• 

Supports Ingress, Non-unicast and Egress

 

Bandwidth rating management  

• 

The trap event and alarm message can be transferred via e-mail and mobile 

phone short message 

• 

Supports diagnostics to let administrator knowing the hardware status 

  Supports external loopback test to check if the link is ok

 

• 

TFTP for firmware upgrade, system log upload and config file import/export 

• 

Supports remote boot the device through user interface and SNMP 

• 

Supports network time synchronization and daylight saving

 

• 

Supports 120 event log records in the main memory and display on the local 

console 

Summary of Contents for 065-7727S
































































































































































































































































































Reviews: