below.
•
The "Clear Log" button will restart the Log, while the
Refresh button will update the messages shown on
screen.
Buttons
Connect
If not connected, establish a connection to your ISP.
Disconnect
If connected to your ISP, hang up the connection.
Clear Log
Delete all data currently in the Log. This will make it easier
to read new messages.
Refresh
Update the data on screen.
Connection Log Messages
Message
Description
Connect on Demand
Connection attempt has been triggered by the "Connect
automatically, as required" setting.
Manual connection
Connection attempt started by the "Connect" button.
Reset physical connec-
tion
Preparing line for connection attempt.
Connecting to remote
server
Attempting to connect to the ISP's server.
Remote Server located
ISP's Server has responded to connection attempt.
Start PPP
Attempting to login to ISP's Server and establish a PPP
connection.
PPP up successfully
Able to login to ISP's Server and establish a PPP con-
nection.
Idle time-out reached
The connection has been idle for the time period speci-
fied in the "Idle Time-out" field. The connection will now
be terminated.
Disconnecting
The current connection is being terminated, due to either
the "Idle Time-out" above, or "Disconnect" button being
clicked.
Error: Remote Server
not found
ISP's Server did not respond. This could be a Server
problem, or a problem with the link to the Server.
Error: PPP Connection
failed
Unable to establish a PPP connection with the ISP's
Server. This could be a login problem (name or pass-
word) or a Server problem.
Error: Connection to
Server lost
The existing connection has been lost. This could be
caused by a power failure, a link failure, or Server fail-
ure.
Error: Invalid or un-
known packet type
The data received from the ISP's Server could not be
processed. This could be caused by data corruption
(from a bad link), or the Server using a protocol which is
not supported by this device.
SIGNAMAX LLC •
www.signamax.eu
44
