Signamax
065-1163T RS-232/422/485 to 10/100BaseT/TX Media Converter
Installation
10
Data Communication Mode
1. Ensure that DIP switch #1 is in the “OFF” position.
(Disables Console mode)
2. Set DIP switches #2, #3 and #4 according to the wire type
as indicated below:
DIP 2
DIP 3
DIP 4
RS-232
ON
OFF
OFF
4-wire
(RS-422/485)
OFF
ON
OFF
2-wire
(RS-485)
OFF
OFF
ON
3. Set DIP switch #7 to the “OFF” position for RS-232
application. (“ON” position for RS-422/485 applications.)
4. Prepare TIA/EIA-574 compliant ‘cross-over’ shielded
cables with DB-9 connectors. (see Appendix A for further
details)
5. Connect male DB-9 connector at one end of the cable to
the converter’s female DB-9 connector.
6. Connect male or female DB-9 connector at the other end
of the cable to the DTE's male or female DB-9 connector.
