Rev 1.0
SignalFire Telemetry
14
From the Gateway configuration window within the SignalFire Toolkit, go to the
Settings
menu and select
Remote Shutdown Settings
. This will open the RSD configuration window.
Source Node
The source node section is used to select the source register for the logic rule.
Slave ID
– The Modbus Slave ID of the remote source node.
Node Type
– Drop-down list of standard SignalFire remote nodes. Select the type of remote node
here, or select
Custom
for manual data entry.
Register Address
– Select the register address for the data to use for the logic, or manually enter the
register address if
Custom
was select for the node type.
Register Type
– The correct register data type will automatically be selected unless
Custom
is used. If
using a custom register address, select the correct data type here.
Current Register Value
– Displays the value of the selected source data register. Clicking the
Update
button will refresh this value.
