10
2)
Find a right place to fix the controller bracket by using
self-screws or ties, then push the controller into the
controller bracket.
2.
Install Door Sensor
1)
Close your garage door.
2)
Clean the area on your garage door where the sensor is to be installed –
railing on the inside, top panel
of the garage door.
3)
Remove the double-sided tape and press into place. You can also use
Self-tap
Screws to install the sensor.
Note:
The door sensor will only work if mounted to the
top panel
of your garage door.
Any other placement will cause incorrect state.
Test
Open or close the garage door for 3 to 5 times, and check the state on
your app.
