SCP 111-S
S-DIAS SAFETY CPU MODULE
Page 14
19.10.2021
3.2.2
S-DIAS Bus/Safety Supply (Output)
Voltage supply
in the S-DIAS bus
+5 V
+24 V
0 A
0 A
in the S-DIAS Safety bus
(supply of the I/O modules)
+12 V
+24 V
max. 0.8 A
2), 4)
max. 0.8 A
2), 4)
2)
dependent on the number of connected modules on the S-DIAS Safety bus
3)
For loading the internal capacitors, a higher power consumption can occur for a short time
(microseconds). This value depends on the input voltage and the impedance of the supply
source.
4)
If this S-DIAS Safety CPU module is connected to several modules, the total currents for
+24 V and +12 V must be calculated based on the module documentations of the used
S-DIAS Safety modules!
The total current of the +24 V supply must not exceed 800 mA.
The total current of the +12 V supply must not exceed 800 mA.
4)
Si ce module S-DIAS Safety est connecté à un SCP avec plusieurs modules S-DIAS, le
courant total des modules utilisés doit être défini et contrôlé.
Le courant total de l'alimen24 V ne peut pas dépasser 800 mA!
Le courant total de l'alimen12 V ne peut pas dépasser 800 mA!
