HBG 1011
10.4“ HANDHELD CONTROL PANEL
Page 26
16.08.2018
8
Recommended Cable Shielding
For applications in which the bus is operated outside the control cabinet, the correct shield-
ing is required. This is especially important, if due to physical requirements, the bus cables
must be placed next to sources of strong electromagnetic noise. It is recommended that
wiring the connector cable in parallel with power cables be avoided whenever possible.
8.1
Connection from the Control Cabinet to the HBG
It is recommended that the shielding be mounted at the entry point of the control cabinet
housing. Noise can then be deflected from the electronic components before reaching the
module.