SIGMATEK 074.00660, Power Installation Manual

Page: 8 / 98

8
Sigmatek FDD Sizes 7 to 9 Power Installation Guide
2 Product information
2.1 Introduction
This guide provides the information necessary to install the following drive models:
FDD3
frame 7 to 9
This guide focuses on the drive power section, for example: electrical installation of the supply /
motor cables and mechanical installation of the drive.
For information about the drive control section, for example: parameter set up information, control
and encoder connections, please refer to the
Control User Guide .
2.2 Model number
The model numbers for the FDD product range are formed as illustrated below:
Figure 2-1 Model number
* Only shown on frame 9E and 10 identification label
For simplicity a Frame 9 drive with no internal choke (i.e. Model 09x.xxxxxE) is referred to as a
Frame 9E and a Frame 9 drive with an internal choke (i.e. Model 09x.xxxxxA) is referred to as a
Frame 9A. Any reference to Frame 9 is applicable to both sizes 9E and 9A.
Identification Label
Electrical Specifications Derivative
Frame Size:
Voltage Rating:
Current Rating:
Heavy Duty current rating x 10
Power Format:
Reserved
0
Optional Build
Customer Code
01 A B 1 0 0
Customer Code:
00 = 50 Hz
01 = 60 Hz
Reserved:
Conformal Coating:
0 = Standard
IP / NEMA Rating:
1 = IP20 / NEMA 1
Brake Transistor:
B
N = No = Brake
Cooling:
A = Air
Documentation
1
2 - 200 V (200 - 240± 10 %)
4
10 %) - 400 V (380 - 480±
Power
Format
FDD- 03 4 00078 A
Configuration
1
A - AC in AC out (with internal choke)
D - DC in AC out (Inverter)
C - AC in DC out (Rectifier)
E - AC in AC out (without internal choke)
T - AC in AC out (12P rectifier plus inverter)
Configuration:
1 - Standard
U - No Control
M - Master
F - Follower
Documentation:
1 - English
FDD
Product Line:
NOTE