Battery Charging
When the new battery is not fully charged, before the use of mobile phone,
you should use up the power of the battery, and then charge the battery by the
following ways.
1. Insert the connector of the charger into the charger socket of the mobile
phone.
2. Insert the charger into the power supply, the battery symbol will be
dynamically displayed, indicating that the battery is being charged.
When charging is finished, the full battery symbol will be displayed, to prompt
that charging is finished.
After charging is finished, please remove the charger from the power supply,
and then unplug the charging plug from the mobile phone.
Tips:
you can charge your mobile phone through USB data connecting line
and the computer connection. If the battery power of your mobile phone has been
fully used up, it may be impossible to charge the mobile phone through USB data
connecting line. At this time, you should use the charger to charge the mobile phone.
Basic Operation
Power On/Off the Phone
Long press the power key to turn on/off the mobile phone.
Tip:
it takes some time to initialize the mobile phone. Please wait patiently.
If the mobile phone is started firstly but SIM card is not inserted, part of
functions in the mobile phone cannot be normally used. After SIM card is inserted,
the mobile phone will automatically inspect whether SIM card can be used or not.
Screen locking and unlocking
After the mobile phone is idle for a long time, the screen is black to enter into
the screen locking state to save the battery power.
Lock screen/mobile phone:
press the power key.
Unlock screen/mobile phone:
press the power key, light up the screen and
display the screen locking state. Press the unlocking icon, and slide towards the
upside to unlock.