Sigma ROX 10.0, Instruction Manual

Page: 35 / 36

This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
11 FCC STATEMENT
(1) This device may not cause harmful interference
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation. NOTE: This equipment has been tested
and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which
can be determined by turning the equipment off and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment
and receiver.
Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help. Changes or modifications not
expressly approved by the party responsible for
compliance could void the user’s authority to operate the
equipment. You can find the CE Declaration under:
www.sigmasport.com
35 ROX 10.0 Manual 16.11.2012