Sigma RC 1209, Manual

Page: 47 / 240

47
GB/US
5.4 BRIEF GUIDE TO DEVICE SETTINGS
Your device settings such as language, unit, correction factor, gender, birth
date, weight, HR max., contrast, button tones and zone alarm are all set in
the same manner: Select the device setting, change the value and save the
modified setting.
Prerequisite: Your running computer must be in the setting mode (to enter
the setting mode, press and hold the set button for 3 sec.).
1 Press the PULSE (-) or SPEED (+) button repeatedly until you get to the
desired device setting.
2 Press the SET button, the value of the device setting flashes.
3 Press the PULSE (-) or SPEED (+) button repeatedly until the desired
value is shown.
4
Press the SET button to save the device setting.
Now you can scroll to another device setting and repeat steps 1-4.
5 SETTING mODE
5.5 mAKING DEVICE SETTINGS
5.5.1 SETTING LANGUAGE
5.5.2 SETTING UNIT
5.5.4 CORRECTION FACTOR
5.5.3 CALIBRATION
Follow steps 1-4 as described in section 5.4 “Brief guide to device settings”
Follow steps 1-4 as described in section 5.4 “Brief guide to device settings”
The correction factor is described in a separate section, see section 6
“Calibration & correction factor”.
The calibration is described in a separate section, see section 6
“Calibration & correction factor”.