![background image](http://html.mh-extra.com/html/sigma/em-140-dg-na-ittl/em-140-dg-na-ittl_instructions-manual_1267706020.webp)
19
TTL MODE
TTL mode can provide correct exposure for subject, and will control the amount of flash.
ۋ
Please refer to <<CHART A>>, which shows the combinations of camera and lens types, exposure
mode, and flash modes.
ۋ
TTL function does not work, in the case of Cameras F3 series, FM10, New FM2, FE10.
1. Set the exposure mode of the camera. (However, depending on the
camera, exposure setting may vary). Please refer to Camera’s
Instruction manual.
2. Slide the Flash’s power switch to the ON position.
3. Select TTL/BL or TTL by pressing the MODE button.
ۋ
When you use Digital SLR Camera, please do not fail to select TTL/BL.
CLS compatible models are controlled by i-TTL exposure system. CLS
incompatible models are controlled by D-TTL exposure system. In both
cases, the character " d " (digital) will be displayed on the LCD panel.
ۋ
In the case of cameras; F6, F5, F4 series, F100, F90X/F90/F80
(N90S/N90/N80) series, F70D/N70, F810S/N8008S, F801/ N8008S
and Pronea 600i. TTL/BL or TTL can be selected. However, Nikon
cameras, other than those on the above list can select only TTL.
4. Focus on the subject.
5. Confirm the Ready Light and press the shutter release button.
ۋ
When the camera does not receive the appropriate exposure for the subject, the TTL/BL or TTL mark on
the LCD panel will appear for 5 seconds after shooting, which shows that the flash power is not enough
for this situation. Please re-take a closer distance or use a wider aperture.
ۋ
When the flash is fully charged, the ready light in the camera’s viewfinder will appear. If it does not
appear, shutter of the camera may operate at a slow shutter speed without triggering the flash.
<<CHART A>>
Camera
Lens Type
Exp. Mode Metering
TTL System
Note
D Type
All Modes
All Modes
3-D Multi-Sensor
BL
AF lens other than
D type
All Modes
All Modes
Multi-Sensor BL
F6, F5
F100
F90X/N90ser.
F80/N80ser.
F70D/N70
Without Built in CPU
A/M
Modes
Center-weighted,
Spot Metering
Center Weighted /
Spot Fill-Flash
Can switch to TTL Mode. With F5, F100,
F80, series Cameras spot metering
system is always TTL.
Matrix Pattern
TTL BL
With Built-in CPU All Modes
Center-weighted,
Spot Metering
Center Weighted /
Spot Fill-Flash
F4 Series
F-801S/N8008S
F-801/N8008
F65/N65
Pronea 600i
Without
Built-in CPU
A/M
Modes
Center-weighted,
Spot Metering
Center
Weighted/Spot
Fill-Flash
Can switch to TTL Mode. TTL BL can
work with only F4 series, AF F3, Ai-S,
Ai, Series E lens. Spot metering system of
F4 is always TTL. Pronea 600i will be
TTL, when exposure mode is “M”.
Center Weighted BL cannot work.
Matrix Pattern
TTL BL
With Built-in CPU All Modes
Center-weighted,
Spot Metering
Center Weighted /
Spot Fill-Flash
F601/N6006
F-601M
Without
Built-in CPU
A/M
Modes
Center-weighted,
Spot Metering
Center Weighted /
Spot Fill-Flash
Spot Metering cannot use with
F-601M
With Built-in CPU
P/S
A/M
TTL BL
If exposure mode is “M”, it will be Center
Weighted/Spot Fill-Flash
F60D/N60
F50D/N50
F-401X/4004S
Without
Built-in CPU
M
Center Weighted /
Spot Fill-Flash
P
TTL Programmed
Built-in CPU lens
,Ai-S, Ai, Series E,
AF F3 Lens
A/M
TTL
F501/N2020
F301/N2000
Except above
lenses
A/M
TTL
P/S
TTL Programmed
With Built-in CPU
A/M
TTL
F401S/N4004S
F401/N4004
Without Built-in CPU
M
TTL
FA, FE2
FG, F3
With Built-in CPU;
Without Built-in CPU
A/M
TTL
ۋ
When you use Digital SLR cameras, functions will vary depending on the lens type and combinations of exposure
modes, same as F5 and F100 group. (However, all TTL exposure functions will be the D-TTL (i-TTL) system).
Summary of Contents for EM-140 DG NA-ITTL
