6
7
The buttons
The BC 23.16 STS has 5 buttons:
LAP
In Function mode:
– PRESS: Start the next lap (press for a moment)
– PRESS AND HOLD: Open the Lap view
(keep the button held down)
In the Lap view:
– PRESS: Scroll forwards through the laps
MENU
In Function mode:
– PRESS: Scroll backwards through the functions
– PRESS AND HOLD: Open Setting mode
In Setting mode:
– PRESS: Open the setting
– PRESS: Confirm finished setting
– PRESS: (in the BACK view): Go one level higher in
the Settings menu
– PRESS AND HOLD: Exit Setting mode;
go back to Function mode
In the Lap view:
– PRESS: Scroll backwards through the laps
BIKE
In Function mode:
– PRESS: Access the BIKE functions
(scroll forwards through the functions)
– PRESS AND HOLD: Reset trip data back to zero
In Setting mode:
– PRESS: Scroll in Setting mode (forwards)
– PRESS: Change the data being set (forwards/increase)
– PRESS AND HOLD: (in the setting menu): go up a level
In the Lap view:
– PRESS: Scroll forwards through the lap values
MENU+BIKE:
PRESS AND HOLD:
Pairing re-sync (new pairing of the transmitter)
MENU+BIKE:
PRESS:
Start the ghost race
(if a comparison trip has been selected)
MENU+HR:
PRESS:
Switch ON/OFF the zoom function of the upper
LCD part
MENU+ALTI:
PRESS:
Switch ON/OFF Light mode
ALTI
In Function mode:
– PRESS: Access the ALTI functions
(scroll forwards through the functions)
– PRESS AND HOLD: Open the ALTI altitude settings
In Setting mode:
– PRESS: Scroll in Setting mode (backwards)
– PRESS: Change the data being set (backwards/reduce)
In the Lap view:
– PRESS: Scroll backwards through the lap values
HR (heart rate)
In Function mode:
– PRESS: Access the HR (heart rate) functions
(scroll forwards through the functions)
– PRESS AND HOLD: Open the HR (heart rate) zone selection
EN