![background image](http://html1.mh-extra.com/html/sigma/6-16khs/6-16khs_operating-manual_1267909042.webp)
Refrigerated Centrifuge with Heating System Sigma 6-16KHS
6 Using the centrifuge
42 / 93
Version 10/2012, Rev. 1.19 of 21/03/2019
• sb
Translation of the original operating manual, part no. 0702302
Fig. 16: Program "RAPID_TEMP"
• Press the start button in order to start the cooling/heating run.
• During the cooling/heating run, only the set temperature can be
changed.
The current status of the program will be displayed on the status bar.
The "RAPID_TEMP" program will be stopped under the following
conditions:
• The set value is reached. In this case, the "RAPID_TEMP" program
stops with a sound signal (if this feature is activated), and the standstill
cooling or heating system will be activated.
• The stop button is pressed. The "RAPID_TEMP" program will be
stopped prematurely. No message will be issued when the set
temperature is reached.
• A parameter is changed (except for the temperature) or another input is
made. In this case, the "RAPID_TEMP" program will be aborted. No
message will be issued when the set temperature is reached.
After the stop, the previous program will be reloaded or the changed
parameters will be adopted as the new settings.
NOTE
The automatic lid opening function is suppressed after a cooling/heating
run in order to prevent the material from heating or cooling again.
NOTE
The delta T temperature monitoring system (see chapter 6.3.2.7 -
"Parameters menu", Process) remains inactive as long as the
"RAPID_TEMP" program is active.
NOTE
If the "RAPID_TEMP" program is used, the temperature of the unloaded
aluminium bucket will be displayed. If samples, which have not been
brought to a specific temperature beforehand, are placed into the buckets,
the displayed temperature will deviate from the actual sample temperature.