Version 04/2008, Rev. 1.18 of 07/06/2012
page 25 of 65
Translation of the original operating manual
5.1.2
Construction and Constructive Safety Measures
The centrifuge is installed within a solid construction. On the back, the lid is
secured by solid hinges and on the front by two separate lid locks.
5.1.3
Drive
The drive motor is a well-dimensioned, collector-less asynchronous motor.
5.1.4
Operation and Display
The display is a hermetically sealed LCD display. It is operated by way of two
rotary knobs and indicates the operating statuses.
5.1.5
Electronic System
The microprocessor-controlled electronic system ensures a wide range of
adaptations of the centrifuge for various tasks. The following parameters can be
set:
•
Speed in steps of 100 or 10 rpm
•
Relative centrifugal force RCF in steps of 10 x g
•
Time between 10 sec and 11h 59min max.
•
Continuous run
•
Short run
•
Acceleration and deceleration curves
•
Storage and call-up of programs
