Sigma V KT848, Installation Manual

Page: 42 / 48

Page 38
Programming
Program 27: XXX (e.g. 008)
DID (DISA port) : XXX (for extension port 001~008)
Program 21: AAA - BBBBBB - C - D (001 - 123456 -1 - 1)
AAA : 001~008 (Access code number)
BBBBBB: DISA password
C : 1~6 (Class of service (refer to program 14))
D : 1~4 (Class of CO line access (refer to program 13))
Program 13: TELXXX – XXXXXXXX (e.g. 125 – 111111111 if system connected
8 CO line)
DISA setting:
EXT :125~128 (125 – Class1; 126 – Class 2; 127 – Class 3; 128 –
Class 4; refer program 21)
XXXXXXXX : CO line access: 0 - Not allow, 1 – Allow
(Remark: This feature must work with AA feature)
Operation
When hearing the announcement of AA, press * and then key-in the password
of DISA. If the password is valid, press 9 + Tel. number. After successfully make
a conversation, system will have alert signal (do do sound) at every 5 minutes.
Press # to continue the conversation; press ## when end of conversation.
v. How to enable SMDR feature