4 SHS800X/SHS1000X Quick Start
Battery Installation
To protect the battery from over discharging, the battery may be delivered separately. Please install
the battery before use as follows:
1. Remove the three screws on the battery cover with a screwdriver, as shown in Figure 1.
2. Remove the battery cover, as shown in Figure2.
3. Put the battery into the battery slot, as shown in Figure3.
4. Lock the screws with the screwdriver, as shown in Figure 1, and then turn on the oscilloscope to
check whether the battery is installed successfully.
5. Connect the DC-DC adapter to the connector on the left side (top view) of the oscilloscope and
charge the battery to a full state the first time power on.
Figure 1
Figure 2
Figure 3