SDS2000X Plus Series Digital Oscilloscope User Manual
57 / 335
WWW.SIGLENT.COM
references (Ref) share the same vertical knob. Rotate the knob to
adjust the vertical scale (volts/div). Push to alternate between
coarse and fine adjustments. When the digital channel is active,
rotate the knob to change the selected digital channel.
F.
Analog channels (C1-C4), digital channels (D), math (F1-F2) and
references (Ref) share the same offset knob. Rotate the knob to
adjust the DC offset or vertical position of the channel. Push to
set the offset to zero. When the digital channel is active, rotate
the knob to change the position of the selected digital channel.
9.3
Horizontal Control
A.
Rotate to adjust the horizontal scale
(time/div). Push to enable Zoom. Push
again to exit Zoom mode.
B.
Push to enable Zoom. Push again to exit
Zoom mode.
C.
Push to enable horizontal Roll. Push again
to exit Roll mode. At timebase settings
larger than 50 ms/div, it is recommended
to set the oscilloscope to Roll mode so that
the waveform is displayed in real time.
D.
Rotate to adjust trigger delay. Push to set
trigger delay to zero.
Summary of Contents for SDS2000X Plus Series
