Sigicom INFRA Point, User Manual

Page: 41 / 58

INFRA MASTER
Copyright © Sigicom AB 2003-2013 41
6.3.3 Display Measurement Events and Data
Comm
Lo. batt
Reg. On
LCD
F1 F2
PROJECT? REGON
Mo 01 Dec 14:57:58
1LCDoff + 2Menus
2
Comm
Lo. batt
Reg. On
LCD
F1 F2
N01:GEO V10-01027
We 23 May 12:12:23
EVNT
3.4 mm/s
1Back + 2Read
6
6.3.3.1 Watch Transients Values
1. Start the LCD display, see sec-
tion 6.3.1.
Make sure REG is ON .
2. Press both [UP] and [DOWN]
to enter the Data Values menu
and its submenu Event
(Transient) .
3. Press [UP] or [DOWN] to
change which node to observe.
4. The value is not updated
automatically when new
transients are recorded. Press
[F2] to update the display.
5. Press both [F2] and [UP] to scroll
into older transients (max 10) or
[F2] and [DOWN] to scroll into
newer transients. Press [F2] for 3
seconds to return to latest
transient.
6. Press [F1] to return to Main
Menu or both [UP] and [DOWN]
to go to the submenu Last
(Interval) , see next section.