Sigicom INFRA Point, User Manual

Page: 25 / 58

INFRA MASTER
Copyright © Sigicom AB 2003-2013 25
4.6.2 Configure FTP Settings
Four files shall be configured, as follows:
1. Open a text editor.
2. On the first row, write the ftp-servers host name.
Example: xxx.ftpserver.se
3. Save the file as ftpserver.txt in the config directory .
4. Start a new file.
5. On the first row, write the username at the ftp site.
Example: sigicom32
6. Save the file as ftplogin.txt in the config directory .
7. Start a new file.
8. On the first row, write the password for your username at the ftp site.
9. Save the file as ftppasswd.txt in the config directory .
10. Start a new file.
11. On the first row, write the path to correct directory on the ftp site were
to put the transferred files.
Example: public_html/infra_files
( If no directory is used, put a dot in the file.)
12. Save the file as ftpdir.txt in the config directory .
4.6.3 Running System without Data Transfer
See section 4.2.
ftpserver.txt ftplogin.txt
ftppasswd.txt ftpdir.txt
config