Sigicom INFRA Point, User Manual

Page: 40 / 58

40
Copyright © Sigicom AB 2003-2013
INFRA MASTER
NOTE
The green LED on the front panel is lit (not flashing)
while transients are being transferred from the nodes to
the INFRA Master. Do not stop measurement or discon-
nect any connection during this, unless you can accept
loss of last triggered transient files.
1. In the Master Unit category,
see Menu Tree in section 6.2,
enter Working Mode Setup ,
which is the first menu in this
category.
2. The password is a sequence of
[UP] and [DOWN] presses:
▲ ▼ ▲ ▼ ▼ ▲ ▼ ▲
3. Press [F2] to Edit .
4. Press [DOWN] to change OFF
to ON , or vice versa.
5. Press [F2] to Save the new
setting.
Comm
Lo. batt
Reg. On
LCD
F1 F2
Working mode setup:
OFF
1Back 2Edit
3
6.3.2.2 Toggle between REG ON/OFF when Quick Reg. Mode is OFF
Comm
Lo. batt
Reg. On
LCD
F1 F2
Working mode setup:
OFF
1Back 2Edit
4