STEP 2: Check ID and PAC
Use Modbus Configuration Cable to read the ID and PAC values
Refer to register address 8 and 10 (DEC)
STEP 3: Configure the sensor's operating parameters
Configure parameters like cycle send data, alarm, a, b,...
Refer to the configuration section
using the Modbus Configuration
STEP 4: Add device to Backend Sigfox
refer to section 5.4 for details
HW Ver.
FW Ver.
Release Date
Functions Change
1.1
1.0
DEC-2020
WSSFC-V1A is a cost effective, Sigfox accelerometer single-axis vibration sensor designed for condition monitoring and
preventive maintenance applications. The piezo-electric accelerometer is available in ranges ±25g or 50g and features
a flat frequency response up to >10kHz. Its accelerometer feature a stable piezo-ceramic crystal in shear mode with
low power electronics, sealed in a fully hermetic package. The Piezo Electric technology incorporated in the WSSCF-V1A
accelerometer has a proven track record for offering the reliable and long-term stable output required for condition
monitoring applications. The accelerometer is designed and qualified for machine health monitoring and has superior
Resolution, Dynamic Range and Bandwidth to MEMS devices. Beside that it can also measure the temperature at
mounting point. With Ultra-low power design and smart firmware allow the complete Wireless and Sensor package run
on 2 x AA battery up to 10 years. It can support all regions of Sigfox network in over the World, RC1, RC2, RC3, RC4,
RC5, RC6, RC7.
SENSOR SPECIFICATION
1. Functions Change Log
2. Introduction
3. Specification
